Use and Care Manual

IX. TROUBLE SHOOTING

PROBLEM

POSSIBLE CAUSES

Appliance does not operate

· The unit may be plugged in using a different voltage.

· The circuit breaker may be tripped or there is a blown

fuse.

The Cooler is not cold enough.

· Check the temperature control settings, as the external

environment may be too hot.

· The door may be opened too frequently.

· The door is not closed completely.

· The door seal does not seal properly.

· The Cooler does not have sufficient clearance.

The Cooler vibrates while

operating.

· Check to assure that the appliance is level.

The Cooler seems to make too much

noise.

· The unit may not be leveled.

· Check the fan.

The Cooler will not close

properly.

· The unit may not be leveled.

· The rattling noise may come from the flow of the

refrigerant, which is normal.

· As each cycle ends, you may hear gurgling sounds

caused by the flow of refrigerant in your unit

· Contraction and expansion of the inside walls may cause

popping and cracking noise.

· The unit is not level.

The LED display does not work.

· There may be a problem with the main control board.

· There is a problem with the plug.

There is an LED display error.

· There is a PCB problem.

The buttons do not function.

· The temperature control panel may be damaged.

The door will not close properly.

· The unit is not level.

· The door was reversed and not properly installed.

· The gasket is dirty or bent.

· The shelves, bins, or baskets are out of position.