Use and Care Manual

- 11 -
The Control Panel:
How to use the press-buttons on the Display Panel:

To control the temperature, press UP or DOWN button. To control the temperature, press UP and DOWN button.
Each press would adjust the temperature by 1°C between 3~10°C or 1°F between 38~50°F.

To turn on or off the internal LED lighting, press LIGHT button on the right side.

To switch the temperature display from Celsius Degree to be Fahrenheit Degree or vice versa, press C/F button.
Care And Maintenance
Cleaning your beverage refrigerator

Unplug the beverage refrigerator and remove the bottles.

Wash the inside with warm water or baking soda solution. The solution should be about 2 tablespoons of baking
soda to a quart of water.

The outside of beverage refrigerator should be cleaned with mild detergent or warm water.

Draw out the water box at the bottom, and wash it.
Moving your beverage refrigerator

Remove all the bottles.

Securely tape down all loose items inside your beverage refrigerator.

Turn the leveling legs up to the base to avoid damage.

Tape the door.

Be sure the beverage refrigerator stays in the upright position during transportation.
Trouble Shootings
You can solve many common beverage refrigerator problems easily, saving you the cost of a possible service call.
Try the suggestion below to see if you can solve the problem before calling the service center.
PROBLEM
POSSIBLE CAUSE
Beverage refrigerator do not operate.
Not plugged in using different voltage. The circuit
breaker tripped or a blown fuse.
Beverage refrigerator is not cold
enough.
Check the temperature control setting.
The door is open too often.
The door is not closed completely.
The door seal does not seal properly.
The beverage refrigerator does not have the correct
clearance.
The light does not work.
Main control board does not work.
PCB Problem.
There is some problem with the plug.
Vibrations.
Check to assure that the beverage refrigerator is
leveled.