ALCOA ASSEMBLY & INSTALLATION INSTRUCTIONS MODEL: 506041 CAMILLA 4 LIGHT SEMI-FLUSH MOUNTING INSTALLATION STEP 1: BLACK & WH' SUPPLY WIRES Attach mounting plate to outlet box with the (2) 8-32 x 3/4” scows. ACRE JUNCTION BOX (NOT INCLUDED) O /——GROUND WIRE n COUNTING PLATE I CRUD COMPONENTS/GLASS ASSEMBLY STEP 2: CLEAR GLASS PANEL 8°GS MERCURY GLASS PANEL 85CS MERCURY GLASS Panel Carefully insert the mercury glass panel as shown. NOTE : The textured side (Mercury) facing away from the bulb.
ASSEMBLY & INSTALLATION INSTRUCTIONS MODEL: 506041 CAMILLA 4 LIGHT SEMI-FLUSH kel o COMPONENTS/GLASS ASSEMBLY LEAR GLASS PARNELL GLASS PANEL STEP 3: Carefully Insert the clear glass panel as shown. L1l STEP 4: Carefully insert all wires to the canopy and hex nut / washer as shown. Tighten the hex nut to the center stem to secure the canopy. H BULB (NOT INCLUDED} o STEP 5. Insert the candle cover to the socket. STEP 6: Install bulbs. Do not install bulbs which excess 60W.
rhino ASSEMBLY & INSTALLATION INSTRUCTIONS MODEL: 506041 CAMILLA 4 LIGHT SEMI-FLUSH ELECTRICAL/ MOUNTING INSTALLATION STEP: STEP 8: STEP 9: /—MOUNTING PLATE GROUND WIRES—— LACK WIRES HoT) CANOPY t WIRES (NEUTRAL) u NuT Conn act bare ground wire from the outset box (if supplied) with connectors. Refer to wiring diagram.
WELCOME ASSEMBLY & INSTALLATION INSTRUCTIONS MODEL: 506041 CAMILLA 4 LIGHT SEMI-FLUSH PARTS LIST IMAGE PARTS NAME QTy X-A Parts Bag 1PC Screw PCS Ball Nut PCS Canopy 1PC Candle cover PCS Page 5 Www Karmic com