Installation Guide

Table Of Contents

r:o

ructions f

ton Ins

mbly & Installati

esAs

11190-010-FR001 2-Light Wall Sconce

Customer Service :(702)361-4345,(800)525-2655,customer.service@kalco.com

WARNING - TO REDUCE THE RISK OF FIRE OR INJURY:

1.lf you are unfamiliar with electrical wiring, call a qualified electrician to install this unit .More than

one person may be necessary to install fixture ,make sure you have enough qualified help.

2.Turn off the power to the fixture's circuit at the service panel. Use a voltage detector to verify that

the power is off.

3.DO NOT install bulb which exceeds the maximum wattage specified on the socket label.

Step 1. Place mount mounting and wiring steps before

crystal installation step

Step 3.

Step 2. Assemble Fabric shadel to the lamp body

as shown,Align holes in Fabric shade with holes in

fixture and secure Fabric shade to fixture using

headless screw

screw

Fabric shade

LAMP BODY

Install E12 bulbs bulb,do not use

bulbs that exceeds 40W

crystal

Flat screw

Fixture Assembly

PAGE 1
Assembly & Installation Instructions f or: 11190-010-FR001 2-Light Wall Sconce Customer Service :(702)361-4345,(800)525-2655,customer.service@kalco.com WARNING - TO REDUCE THE RISK OF FIRE OR INJURY: 1.lf you are unfamiliar with electrical wiring, call a qualified electrician to install this unit .More than one person may be necessary to install fixture ,make sure you have enough qualified help. 2.Turn off the power to the fixture's circuit at the service panel.
PAGE 2
Assembly & Installation Instructions f or: 11190-010-FR001 2-Light Wall Sconce Customer Service :(702)361-4345,(800)525-2655,customer.service@kalco.com Fixture Assembly Step 4. Fasten 2 (state specification of screw ) into mounting plate so that they extend away from wall when mounting plate is installed ELECTRICAL BOX Step 5. Attach the mounting plate to outlet box with screws LAMP BODY MOUNTING BLOCK Nipple Step 6. Refer to wiring diagram.