ASSEMBLY & INSTALLATION INSTRUCTIONS 4 MODEL: 403422 SHERWOOD 3 LIGHT MEDIUM WALL BRACKET ALCOA COMPONENT ASSEMBLY STEP 1: Disassemble item by removing screws to the main fixture RE A as shown ¥ ' STEP 2: Drop the glass panel to the frame as shown. STEP 3: Install again the top frame, secure using the screw provided as shown. LIP & BOLT a LASS PANEL FRAME NOTE : To avoid electric shock, apply water sealant on all sides of the fixture mounted on the wall.
ASSEMBLY & INSTALLATION INSTRUCTIONS MODEL: 403422 SHERWOOD 3 LIGHT MEDIUM WALL BRACKET ELECTRICAL / MOUNTING INSTALLATION STEP 4: Fasten (2) 8-32 x 1 %" studs into mounting plate so that they extend away from the ceiling when the mounting plate is installed. JUNCTION BOX 82" x ¥4" SCI (NOT INCLUDED) BLAG & WHITE SUPPLY WI STEPS: Attach mounting plate to outlet box with the (2) 8-32 x 8RZ x1 1/2 STUD (2 FCs) 34" screws. GROUND SUPPLY Wi UNITING PLATE STEP 6: Refer to wiring diagram.
i KALE ASSEMBLY & INSTALLATION INSTRUCTIONS MODEL: 403422 SHERWOOD 3 LIGHT MEDIUM WALL BRACKET PARTS LIST PARTS NAME QTY X-A Parts Bag 1PC Screw PCs [ Ball Nut PCs Hex Nut PCS Stud PCS Side Glass Panel PCS | Candle Cover 3PCcs Page d ‘www.