ALCOA & ASSEMBLY & INSTALLATION INSTRUCTIONS MODEL: 4300 TRANSCRIBE 3LT ISLAND LIGHT MOUNTING / ELECTRICAL INSTRUCTIONS STEP 1: STEP 2: STEP 3: STEP 4: STEP 5: STEP 6: STEP 7: Fasten nipple into mounting plate so that they extend away from the ceiling when the mounting plate is installed. Lock in place using the hex nut & washer provided Attach mounting plate to outs box with the (2) 8-32 x I" screws. Determine fixture height. Make adjustment if needed.
ASSEMBLY & INSTALLATION INSTRUCTIONS MODEL: 4300 TRANSCRIBE 3LT ISLAND LIGHT ALCOA COMPONENT ASSEMBLY INSTRUCTIONS STEP 8: STEP 9: GIMBALS: GLASS — GALS! 100W BULB (NOT INCLUDED) Install bulbs. Do not install bulbs which exceed 100W. Use glass screws to secure glass. Line up the hole with gimbals hole. Thread in one glass screw halfway and repeat for the other screws. Then finally tighten all screws.
MODEL: 4300 TRANSCRIBE 3LT ISLAND LIGHT KALE ASSEMBLY & INSTALLATION INSTRUCTIONS PARTS LIST IMAGE PARTS NAME ary X-9 Parts Bag 1PC Screw PCs Threaded Nipple 1PC Star Washer 1PC Hex Nut PCs Rs cap 1PC Open-Able Chain PCs Canopy 1PC Chain (ft) PCs Glass Screw PCs Page 4 www _alcoholism
