User's Manual

KALI AUDIO LP-6/LP-8 USER MANUAL 10
Inputs and Controls
Volume Control
The volume control allows users to adjust the output of the speaker from -∞ to +6 dB.
There is a center detente at the +0 dB setting, and this is where Kali recommends you
leave the volume setting, adjusting the level instead from your device. Two notable ex-
ceptions to this recommendation are:
1. If you are working in an asymmetrical room, it may be necessary to have one
monitor louder than the other to achieve balance.
2. If your playback device does not have an independent volume control, it will be
necessary to adjust the volume directly from the speaker.
Power Input
Connect the provided power cord to this input. The LP-6 has an international switch-
mode power supply, so there’s no need to worry about setting it for your local voltage or
frequency
On/Off Switch
Power the speaker on and off. Be sure to power the speaker off when connecting or dis-
connecting the power cable, during lightning storms, or during extended periods of
disuse.