User's Manual
KALI AUDIO LP-6/LP-8 USER MANUAL 14
•Before you plug the speaker in, make sure that the power switch is in the OFF position
•Plug the speaker in
•Connect audio cables
First Time Setup
If you’re connecting RCA, make sure that dip switch #8 is switched UP to the ON position
If you’re connecting XLR or TRS, make sure that dup switch #8 is switched DOWN to the OFF
position
•Turn the volume knob counter clockwise as far as it will go
•Turn the speaker on
•Start playing material from your playback device at a low volume
•Slowly turn the volume knob clockwise to the center detente, -0 dB position. Make sure you hear
what you’re playing
•Set the boundary EQ for your application. Refer to page 11 above.
•Repeat these steps for every speaker you’re using.
•Sit in your listening position, and turn the volume up on your playback device to the desired level
•Enjoy your new studio monitors!