User's Manual

KALI AUDIO WS-12 Studio/Live Subwoofer User’s Guide 10
Inputs and Controls
Dip Switches
The dip switches control crossover, location-based gain, polarity, standby mode,
and power to the RCA input. A full explanation of the operation of the dip switch-
es can be found on page 11.
Footswitch Input
The footswitch input allows for a footswitch to be connected to the subwoofer to
toggle between normal operation and bypassed operation. When the subwoof-
er is bypassed, the subwoofer will no longer play, and the high-pass filter on the
outputs will be disabled. This is useful for monitoring with or without a subwoofer
depending on your current use case, or even just to check mixes back and forth.
Power Input
Connect the provided power cord to this input. Before powering the unit on, be
sure that the 110V-230V switch (10) is set to the appropriate setting for your loca-
tion. Most areas in North America use 110V power, and most areas in Europe use
220V power. If you are unsure of the voltage in your location, search “Local Voltage
(Name of your country.)”
On/Off Switch
Power the speaker on and off. Be sure to power the speaker off when connecting
or disconnecting the power cable, during lightning storms, or during extended
periods of disuse. Before powering the unit on, be sure that the 110V-230V switch
(10) is set to the appropriate setting for your location. Most areas in North America
use 110V power, and most areas in Europe use 220V power. If you are unsure of the
voltage in your location, search “Local Voltage (Name of your country.)”
110V-230V Power Switch
The WS-12 requires you to select the appropriate input voltage for your location.
Before powering the unit on, be sure that the 110V-230V switch (10) is set to the
appropriate setting for your location. Most areas in North America use 110V power,
and most areas in Europe use 220V power. If you are unsure of the voltage in your
location, search “Local Voltage (Name of your country.)”
Front LED
Solid Blue: The WS-12 is on and operating normally.
Flashing Blue: The WS-12 is on, but bypassed via the footswitch.
Solid Orange: The WS-12 is in Standby Mode. See page 14.