User's Manual

KALI AUDIO WS-12 Studio/Live Subwoofer User’s Guide 12
Dip Switches
Switches 1-4: Crossover
Position 10: External Crossover
The subwoofer is receiving low-passed signal from an external source, and full range
sound is being crossed over and processed by an external processor. Use this setting if
you want to use your own crossover, or if you’re using a system larger than 2.1. Note that
in this position, the subwoofer will play up to about 1 kHz unless the signal you send to it
is low-passed.
Switch 1: UP
Switch 2: DOWN
Switch 3: DOWN
Switch 4: UP
Positions 3-8: Generic Crossovers
The subwoofer is passing signal to full range speakers not made by Kali Audio. These crossovers will send a
low-passed signal to the subwoofer, and a complementary high-passed signal to the full range speakers via
the XLR output. If you’re unsure which to use, try them each and see which one sounds best in your applica-
tion.
Position 3: 40 Hz
Switch 1: DOWN
Switch 2: UP
Switch 3: DOWN
Switch 4: DOWN
Position 4: 60 Hz
Switch 1: UP
Switch 2: UP
Switch 3: DOWN
Switch 4: DOWN
Position 5: 80 Hz
Switch 1: DOWN
Switch 2: DOWN
Switch 3: UP
Switch 4: DOWN
Position 6: 100 Hz
Switch 1: UP
Switch 2: DOWN
Switch 3: UP
Switch 4: DOWN
Position 7: 120 Hz
Switch 1: DOWN
Switch 2: UP
Switch 3: UP
Switch 4: DOWN
Position 8: 140 Hz
Switch 1: UP
Switch 2: UP
Switch 3: UP
Switch 4: DOWN