User's Manual

KALI AUDIO WS-12 Studio/Live Subwoofer User’s Guide 14
Dip Switches
Switch 8: RCA Input
Switch 8 turns the RCA input on and off. By default, the RCA input on the speaker is OFF.
This is to prevent interference when that input is not being used. When connecting to the
RCA input, enable it by moving switch #8 on the dip switches UP to the ON position. If the
RCA input is no longer being used, move switch #8 back DOWN to the OFF position.
Position 1: Off
Switch 8: DOWN
Position 2: On
Switch 8: UP
Switch 9: Standby Mode
The WS-12 is equipped with a standby feature which will put the subwoofer into a
low-power mode after 20 minutes of disuse. In low-power mode, the power LED will turn
orange, and the subwoofer will not pass audio. The subwoofer will come back online
once it receives signal. If this operation is not desired, turn switch 9 up to disable standby
mode.
Position 1: On
Switch 9: DOWN
Position 2: Off
Switch 9: UP