Project Lone Pine Professional Studio Monitors LP-6/LP-8 v2 User’s Guide KALI AUDIO LP-6/LP-8 2nd Wave Studio Monitors User’s Guide 1
Table of Contents IMPORTANT SAFETY INFORMATION………………….................………………….3 ABOUT YOUR STUDIO MONITOR.…………..……….....................………………….5 FULL SPECIFICATIONS………………………………...……....................…………………8 INPUTS AND CONTROLS……………………………...………....................………………9 DIP SWITCHES........................................................………...…...................………….12 CLIMATE CONSIDERATIONS............................................................................15 FIRST TIME SETUP………………………………………….
Important Safety Information 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Power the product down, and unplug it from power before cleaning. 7. Clean only with a dry cloth. 8. Do not block any ventilation openings. 9. Keep ventilation opening free of dust or other matter. 10.
Important Safety Information 21. Refer all servicing to qualified service personnel. Servicing is required when: A. The apparatus is damaged in any way B. The power supply cord or plug is damaged C. Liquid or other objects have fallen into the product D. The product has been exposed to rain or moisture E. The product does not operate normally F. The product has been dropped 22. High sound pressure in excess of 85 dB can cause hearing damage and/or loss. Do not expose yourself to high sound pressure levels.
About Your Studio Monitor Congratulations on your Kali Audio LP-Series Studio monitors! These monitors were designed to deliver exceptional accuracy in all sorts of recording, mixing, and production applications. We’re confident that no matter what genre or format you’re working in, you will come to depend on these monitors for their accuracy, reliability, and superior design and construction. Where does “LP” come from? The official name of this product line is “Project Lone Pine.
About Your Studio Monitor Features Low Noise Port Tube The port tube on the LP-Series was designed to deliver all the benefits of a front-firing port tube, without any drawbacks associated with noise. On most port tubes, air leaves at different speeds from different points of the opening, creating noisy turbulence. This turbulence can be heard as “chuffing,” or an audible air sound coming from the monitor. This sound will add to the noise floor and obscure the details of the low end.
About Your Studio Monitor Features 2nd Wave The LP-Series now uses Kali’s 2nd Wave technology platform, which realizes several advantages over our older products. As of November 2021, all Kali Audio studio monitors are now in their 2nd Wave. If you purchased an LP-series monitor before that date, it may be a 1st Wave product. This manual only applies to 2nd Wave versions of the LP-6 and LP-8. A manual for the 1st Wave products can be found at KaliAudio.
Specifcations LP-6 LP-8 Yes Powered: Amplifier Class: D Power Configuration: Bi-Amped HF Power: 40W (Continuous) LF Power: 40W (Continuous) 60W (Continuous) Total Power: 80W (Continuous) 100W (Continuous) HF Driver: 1-Inch Textile Dome LF Driver: 6.5-Inch Optimized Paper 8-Inch Optimized Paper Crossover: 1500 Hz 1800 Hz Frequency Response: (-10dB) 39 Hz - 25 kHz 37 Hz - 25 kHz Frequency Range: (+/-3 dB) 47 Hz - 21 kHz 45 Hz - 21 kHz Recommended Listening Distance: .5 - 2.
Inputs and Controls KALI AUDIO LP-6/LP-8 2nd Wave Studio Monitors User’s Guide 9
Inputs and Controls Dip Switch Quick Reference Guide The quick reference guide on the back of the speaker can help you set the dip switches to the appropriate positions for your application without needing to consult this manual. Dip Switches The dip switches control Boundary EQ, HF and LF Trim, and power to the RCA input. A full explanation of the operation of the dip switches can be found on page 11.
Inputs and Controls Volume Control The volume control allows users to adjust the output of the speaker from -∞ to +6 dB. There is a center detente at the +0 dB setting, and this is where Kali recommends you leave the volume setting, adjusting the level instead from your device. Two notable exceptions to this recommendation are: 1. If you are working in an asymmetrical room, it may be necessary to have one monitor louder than the other to achieve balance. 2.
Boundary EQs & Dip Switches One of the most innovative features of the Lone Pine Series monitors are the boundary compensation EQs. These EQs were made to compensate for low frequency interactions that the speakers will have with various surfaces in many common placements. Each set of dip switches controls one aspect of the speakers performance, independent of the other switches. Switches 1-3 control the boundary compensation EQs. Switches 4 and 5 control the LF trim. Switches 6 and 7 control the HF trim.
Dip Switches Switches 1-3: Boundary Compensation EQs Position 4: Console Bridge The speaker is on a console bridge or meter bridge. Switch 1: UP Switch 2: UP Switch 3: DOWN Position 5: On a Desk, Away from Walls The speaker is on a desk or table, and is more than .5 meters (20 inches) away from any walls. Switch 1: DOWN Switch 2: DOWN Switch 3: UP Position 6: On a Desk, Close to a Wall The speaker is on a desk or table, and is within .5 meters (20 inches) of a wall, without being butted right against one.
Dip Switches Switches 4&5: Low Frequency Trim The Low Frequency trim will add or subtract 2 dB from the Low Frequency response of the speaker. This can be done as a matter of personal taste, or if the room you’re mixing in requires additional adjustment beyond what is offered by the boundary compensation EQs.
Climate Considerations • The Lone Pine Series’ studio monitors’ enclosures are made of MDF wood and wrapped in vinyl, which is sensitive to heat and humidity. The product should be kept and used in a climate-controlled environment. Exposure to direct sunlight, moisture, or consistent humidity above 65% may cause the vinyl to peel and wrinkle. This is not covered under warranty.
Troubleshooting 1. I opened the speaker, and it is damaged. If you received a speaker that is obviously damaged, please contact your dealer immediately. 2. The speaker is making no sound. • Is the speaker plugged in? • Is the speaker turned on? There should be a blue LED on the front of the speaker if it’s on. If this light is off, the speaker is turned off.
Warranty What does this warranty cover? This warranty covers defects in materials or workmanship for a period of one year (365 days) after the purchase date of the product. What will Kali do? If your product is defective (materials or workmanship,) Kali will replace or repair the product at our discretion - free of charge. How do you initiate a warranty claim? Contact the retailer from whom you bought the product to initiate a warranty process.
