Operation Manual

Contents
1 Safety 4
1.1 General 4
1.2 Statutory requirements 4
1.2.1 Meaning for the rider 4
1.3 Battery 5
1.4 Charger 6
1.5 Motor 7
1.6 Adjustments/maintenance/repair 7
1.7 Transportation of the Pedelec 7
1.7.1 The Pedelec and your car 7
1.7.2 The Pedelec on trains 7
1.7.3 The Pedelec on aeroplanes 7
2 Composition of the vehicle 8
3 First steps 9
3.1 Checking the tightening torques 9
3.2 Fitting the pedals 9
3.3 Adjusting the saddle height 9
3.3.1 Clamping screw 9
3.3.2 Quick-release device 9
4 Quick start 10
5 Battery 11
5.1 Charging the battery 11
5.1.1 Removing the battery 12
5.1.2 Charging operation 12
5.1.3 Installing the battery 13
5.2 Battery information system 14
5.2.1 Checking the charge state 14
5.2.2 Checking the capacity 14
5.3 Battery management 15
5.3.1 Sleep mode 15
5.4 Warranty and service life 15
5.5 Storage 16
5.6 Shipping 16
5.7 Disposal 16
6 Charger 16
7 Control panel and display 17
7.1 Control panel 17
7.1.1 Switching on/o 17
7.1.2 Push assist 17
7.1.3
/ buttons 17
7.2 Display small 18
7.2.1 Assistance indicator 18
7.2.2 Battery charge state indicator 18
7.2.3 Units 19
7.3 Display 19
7.3.1 Assistance indicator 19
7.3.2 Battery charge state indicator 19
7.3.3 Units 19
7.3.4 Remaining range indicator 19
7.4 Programming and settings 19
7.4.1 Drive data 20
7.4.2 Delete trip data 20
7.4.3 Delete overall data 20
7.4.4 Device settings 20
7.4.4.1 Display 20
7.4.4.2 Drive 21
7.4.4.3 Miscellaneous 22
7.4.5 Personalize 22
7.4.6 Target cost 22
8 The motor 24
8.1 Operation 24
8.2 Range 24
8.3 Riding your Pedelec eciently 25
8.4 Warranty and service life 25
9 Troubleshooting 26
10 Cleaning 27
10.1 Battery 27
10.2 Motor 27
10.3 Display 27
10.4 Control panel 27
10.5 Charger 27
11 Technical data 28