Operation Manual

EN-6 Original User Guide | Pedelec Impulse Evo RS Speed Version 1
II. General safety information
WARNING
Rim brakes: When cycling for long periods downhill, try to avoid
continual, uninterrupted braking if possible. It may result in a
reduction of braking eect or damage to the tyres. It is better to brake
every now and then with "cooling times" in-between, allowing the
head wind to cool the braking system. If absolutely necessary, take
breaks to let the braking system cool down.
Regularly check wearing parts such as brakes, brake pads and tyres.
Damaged parts can cause accidents and falls. The addition power
means higher loads are applied to wearing parts on a S-Pedelec
than on a normal cycle. Replace brake pads when their wear limit is
reached. This is evident from the mark on a brake pad and when you
can pull the brake lever all the way back to the handle bars.
Do not touch the motor after a long downhill ride - it can become very
hot. Touching it can cause burns.
Also follow the safety instructions at the start of the next section.
PLEASE NOTE
This symbol in conjunction with "Please note" denotes a
potentially dangerous situation. Failure to comply with this safety
symbol may result in damage to the S-Pedelec and its components.
This symbol denotes user tips and particularly useful or
important information on the product or its additional
benet. It is not an indication of a dangerous or harmful
situation.
I.V Customer service
If you have any questions on the cycle or its components, please contact a
trained cycle dealer or the customer service team at Derby Cycle/Raleigh
Univega:
Derby Cycle GmbH/Raleigh Univega GmbH
Siemensstraße 1-3
49661 Cloppenburg, Germany
[phone]