Operation Manual

EN-32 Original User Guide | Pedelec Impulse Evo RS Speed Version 1
3.4.2.18 Version
Proceed as follows if you want to display the name of the software version
currently on your display:
1. Navigate to "Version" as described in  3.4.1 Configuring settings in
the menu Page EN-22. This shows the current display software.
2. Press the
button to return to the sub-menu
Ask as part of maintenance work in the service book
whether there is new software for your S-Pedelec.
3.4.2.19 Speed
In the „Speed“ sub-item, you can set the speed up to which the drive
provides assistance.
1. Navigate to „Speed“ as described on Page 22 in Section 3.4.1
Conguring settings in the menu  3.4.1 Configuring settings in the
menu Page EN-22. You can select a value in range 6 km/h to 45 km/h.
Selecting „OFF“ means the drive unit provides assistance up to 45
km/h.
2. Use the / buttons to select the value required. The value selected has a
black background.
3. Conrming the wheel circumference returns you to the sub-menu.
2. Use the
/ buttons to select the letters required. Letters selected
have a black background.
Setting the name
14.5
km/h
Pushing Assistance
Hint (1/1)
16:53
140 km
POWER
AA
Name
—
A BCDEFGH I JKL M N
OPQR STU VWXYZ
Ä Ö Ü ß Â ÊÎÔÛÀÈÌÒÙ
Á ÉÍÓÚ
<- ok abc...
A
a b c d efghijk l m nop
q rstu v w xyz ä öüß â ê
îôûàèìòùáéíóú
<- ok
ABC...
Name
—
14.5
km/h
Pushing Assistance
Hint (1/1)
16:53
140 km
POWER
AA
Name
—
A BCDEFGH I JKL M N
OPQR STU VWXYZ
Ä Ö Ü ß Â ÊÎÔÛÀÈÌÒÙ
Á ÉÍÓÚ
<- ok abc...
A
a b c d efghijk l m nop
q rstu v w xyz ä öüß â ê
îôûàèìòùáéíóú
<- ok
ABC...
Name
—
3. Conrm with the button
4. Once you have made your selection, press "OK" to return to the sub-
menu or
for the start menu
3.4.2.16 SET favourites
 3.3.6.2 Preselecting SET favourites Page EN-21
3.4.2.17 Factory settings
1. Navigate to "Factory settings" as described in  3.4.1 Configuring
settings in the menu Page EN-22.
2. Prompt "Reset to factory settings?" is shown on the display, with "Yes"
and "No" underneath
3. Select the required option using the
/ buttons. The selection has a
black background.
4. Conrm your selection by briey pressing the
button. You return to
the sub-menu.