Installation Sheet

INSTALLATION INSTRUCTIONS

Volume Control Valve Trim

1072177-2-G

5 of 6

Questions? Problems? For additional assistance, please contact KALLISTA’s Customer

Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.

3. INSTALL THE FRONT PLATE

Valve Stem

Adapter

Screw

Verify the seal covers

the wall opening.

Screw

 Ensure the valve stem adapter is ﬁ rmly pressed onto the valve stem.

 Secure the valve stem adapter to the valve with the correct length screw, as selected in the “Install the

Valve Stem Adapter” section of this guide.

 Align the holes on the front plate assembly and the valve.

NOTE: Be sure to select the correct length screw for your application.

 Attach the two screws through the front plate assembly and into the valve. Do not overtighten.

 Visually inspect the front plate assembly to ensure the foam seal is completely covering the wall opening. If

not, stop the installation and repair the wall opening.