Installation Sheet

INSTALLATION INSTRUCTIONS
Handshower, Hose
& Handshower Accessories
1188577-2-E
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com
2 of 5
THANK YOU FOR CHOOSING KALLISTA
We appreciate your commitment to KALLISTA quality products. Please take a moment to review this manual
before you install your KALLISTA product. If you encounter any installation or performance problems, please do
not hesitate to contact us at the phone number listed at the bottom of the page.
BEFORE YOU BEGIN
WARNING: Risk of scalding. High water temperature can cause severe burns. Set the water temperature
at or below 120°F (49°C) following the adjustment procedure in the valve Installation Instructions.
CAUTION: Risk of scalding. KALLISTA low- ow showerheads/handshowers are designed for use with
compatible KALLISTA valves. When installing a low- ow product to an existing showering system, verify
compatibility before showering. Do not use this KALLISTA low- ow product with a shower valve that allows the
water temperature to become too hot when other plumbing products are used.
Prior to using your shower, verify your new showerhead/ handshower is compatible with your shower valve
(located behind the wall):
While standing outside the shower, turn on the shower valve. Do not step into the shower.
Adjust the water to your typical showering temperature.
Have someone ush the nearest toilet.
With your hand, carefully check the water temperature from the showerhead/handshower while the toilet is
re lling.
If the water becomes signi cantly more hot, you will need to replace the shower valve with a compatible
KALLISTA valve or return your showerhead/handshower.
NOTE: Plumbing codes may require a vacuum breaker be installed in-line to handshowers. Please consult with
local plumbing codes.
Carefully plan the location of the wall supply elbow and xed wall bracket to avoid the possibility of the
handshower hose interfering with the operation of any faucets and/or drains, etc.
Please read all instructions before you begin.
Observe all local plumbing and building codes.
Shut off the water supply.
Inspect the supply piping for damage. Replace as necessary.
KALLISTA reserves the right to make revisions in the design of products without notice, as speci ed in the
Price Book.