Handshower, Hose & Handshower Accessories INSTALLATION INSTRUCTIONS P21650, P21660, P24452, P24453, P24454, P24456, P24743, P24745, P24746, P24761, P24843 1188577-2-F ©2014 KALLISTA 1 of 5 Questions? Problems? For additional assistance, please contact KALLISTA’s Customer Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.
Handshower, Hose & Handshower Accessories INSTALLATION INSTRUCTIONS THANK YOU FOR CHOOSING KALLISTA We appreciate your commitment to KALLISTA quality products. Please take a moment to review this manual before you install your KALLISTA product. If you encounter any installation or performance problems, please do not hesitate to contact us at the phone number listed at the bottom of the page. BEFORE YOU BEGIN WARNING: Risk of scalding. High water temperature can cause severe burns.
Handshower, Hose & Handshower Accessories INSTALLATION INSTRUCTIONS TOOLS AND MATERIALS Pencil Tape Measure Drill Level Assorted Screwdrivers Hex Wrench Thread Sealant Adjustable Wrench Pipe Wrench . 1. INSTALL THE SUPPLY ELBOW (P24452) Shower Ell Adapter O-Ring Supply Elbow Apply thread sealant tape. Install a temporary nipple into the shower ell. Run water through the system to flush out dirt and debris. Remove the temporary nipple from the shower ell.
Handshower, Hose & Handshower Accessories INSTALLATION INSTRUCTIONS 2. INSTALL THE FIXED WALL BRACKET (P24453) Drill holes using a 5/16" bit. Anchor 13/16" (21 mm) Fixed Wall Bracket Screw Press and hold legs together. Determine the location for the fixed wall bracket. Mark the hole locations for the wall anchors. Drill the holes and install the wall anchors. Attach the fixed wall bracket to the wall with the screws. 3.
Handshower, Hose & Handshower Accessories INSTALLATION INSTRUCTIONS 4. INSTALL THE OPTIONAL SLIDEBAR (P24456) Cap Setscrew O-Ring Coupling Tube Drill a 5/16" hole for the anchor. Escutcheon Handshower Bracket Anchor Sleeve Hub Screw Coupling O-Ring Setscrew Cap 1188577-2-E 5 of 5 Determine the location for the slidebar. Mark the hole locations for the wall anchors. Drill the holes and install the wall anchors. Attach the escutcheons, sleeves, and hubs with the screws.
Wall Bracket with Integrated Supply Elbow INSTALLATION INSTRUCTIONS P21651 1230883-2-B 1 of 3 KALLISTA ©2015 P21652 Questions? Problems? For additional assistance, please contact KALLISTA’s Customer Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
Wall Bracket with Integrated Supply Elbow INSTALLATION INSTRUCTIONS THANK YOU FOR CHOOSING KALLISTA We appreciate your commitment to KALLISTA quality products. Please take a moment to review this manual before you install your KALLISTA product. If you encounter any installation or performance problems, please do not hesitate to contact us at the phone number listed at the bottom of the page. BEFORE YOU BEGIN NOTE: Plumbing codes may require a vacuum breaker be installed in-line to handshowers.
Wall Bracket with Integrated Supply Elbow INSTALLATION INSTRUCTIONS 1. INSTALL THE PIPE NIPPLE 11/16" (17 mm) Beyond Finished Wall 1/2" NPT Nipple Apply sealant tape. 3/8" (10 mm) Max 1-5/8" (41 mm) Max Apply sealant tape to one end of a 1/2” NPT nipple. Install the nipple to extend 11/16″ (17 mm) beyond the finished wall. Ensure the gap between the nipple and finished wall is no more than 3/8” (10 mm). 2. INSTALL THE WALL BRACKET Wall Bracket Apply sealant tape.
Shower Arms INSTALLATION INSTRUCTIONS 1193441-2-A 1 of 3 P21520 P21521 P21522 P21523 Questions? Problems? For additional assistance, please contact KALLISTA’s Customer Service Department at 1-888-4-KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
Shower Arms INSTALLATION INSTRUCTIONS THANK YOU FOR CHOOSING KALLISTA We appreciate your commitment to KALLISTA quality products. Please take a moment to review this manual before you install your KALLISTA product. If you encounter any installation or performance problems, please do not hesitate to contact us at the phone number listed at the bottom of the page. IMPORTANT IMFORMATION Observe all local plumbing and building codes. Shut off the main water supply.
Shower Arms INSTALLATION INSTRUCTIONS INSTALL THE SHOWER ARM Escutcheon (Not Provided) Shower Ell (Wall) Shower Ell (Ceiling) Escutcheon (Not Provided) Shower Arm Shower Arm Apply thread sealant tape. Showerhead (Not Provided) CAUTION: Risk of product damage. To avoid plugging the showerhead spray outlets, use thread sealant tape on the shower arm threads. Do not use thread sealant compound (pipe dope). NOTE: The showerhead and escutcheon are not provided.
Shower Arms INSTALLATION INSTRUCTIONS 1193441-2-A 1 of 3 P21520 P21521 P21522 P21523 Questions? Problems? For additional assistance, please contact KALLISTA’s Customer Service Department at 1-888-4-KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
Shower Arms INSTALLATION INSTRUCTIONS THANK YOU FOR CHOOSING KALLISTA We appreciate your commitment to KALLISTA quality products. Please take a moment to review this manual before you install your KALLISTA product. If you encounter any installation or performance problems, please do not hesitate to contact us at the phone number listed at the bottom of the page. IMPORTANT IMFORMATION Observe all local plumbing and building codes. Shut off the main water supply.
Shower Arms INSTALLATION INSTRUCTIONS INSTALL THE SHOWER ARM Escutcheon (Not Provided) Shower Ell (Wall) Shower Ell (Ceiling) Escutcheon (Not Provided) Shower Arm Shower Arm Apply thread sealant tape. Showerhead (Not Provided) CAUTION: Risk of product damage. To avoid plugging the showerhead spray outlets, use thread sealant tape on the shower arm threads. Do not use thread sealant compound (pipe dope). NOTE: The showerhead and escutcheon are not provided.
Deck Diverter Trim INSTALLATION INSTRUCTIONS P23120-LV P24420-CR P24520-LV 1085257_2_C 1 of 3 P24420-LV P24520-TT Questions? Problems? For additional assistance, please contact Kallista’s Customer Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
Deck Diverter Trim INSTALLATION INSTRUCTIONS Thank You For Choosing Kallista We appreciate your commitment to Kallista quality products. Please take a moment to review this manual before you install your Kallista product. If you encounter any installation or performance problems, please do not hesitate to contact us at the phone number listed at the bottom of the page. BEFORE YOU BEGIN INSTALLER INFORMATION Please read all instructions before you begin.
Deck Diverter Trim INSTALLATION INSTRUCTIONS INSTALL VALVE STEM EXTENSION Install a spline adapter on the spline at the end of the valve stem. Install another spline adapter on the spline at the end of the valve stem extension. Attach the valve stem extension to the valve stem with the pan head screw. Pan Head Screw Spline Adapter Valve Stem Extension Spline Adapter Valve Stem 2.