Specification Sheet

FEATURES
● Brass Valve Body
● Pressure-Balancing Diaphragm Design
● Pressure-Balancing Mechanism of One-
Piece Diaphragm Cartridge Design for Ease
of Maintenance
● Mixing Valve Cycles from ″Cold″ to ″Hot″
● Integral Diverter Mechanism
● High-Temperature Limit Setting for Added
Safety
● Available with or without Screwdriver Stops
● Designed for Showerhead and Handshower
Applications
Pressure Balance Valve with Diverter
SPECIFIED MODEL
Model Description Finishes
P29305-00 Pressure Balance Valve with Diverter, without screwdriver stops
 NA
P29305-WS Pressure Balance Valve with Diverter, with screwdriver stops  NA
1145856_4_B
We reserve the right to make revisions without notice in the design of products or in packaging unless this right has specically been waived at the time the order is accepted.
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX [phone].
P29305
ROUGHING-IN NOTES
Avoid cross-ow conditions. Do not install shut-off device on
either valve outlet.
CODES/STANDARDS APPLICABLE
Specied model meets or exceeds the following:
● ASME A112.18.1/CSA B125.1
● ASSE 1016
Primary Outlet Port
Valve defaults to
this point.
1/2" Cold
1/2" Hot
5-3/4" (146 mm)
With Stops
4" (102 mm)
Without Stops
Finished Wall
Secondary Outlet Port
Valve diverts to this port.
1/2"- 14 NPT OD 5/8" ID
For 1/2" Nom. Copper Tubing.
(all Inlet & Outlet Ports)
2"
(51 mm)
2-1/16"
(52 mm)
3-13/16"
(97 mm)
2-3/4" (70 mm)
Thin Wall
2-3/4" (70 mm) to
3-1/2" (89 mm) Thick Wall