Installation Guide

SERVICE KIT INSTRUCTIONS

Questions? Problems? For additional assistance, please contact KALLISTA’s Customer

Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.

1244483-9-B

1 of 1

Basin Valve Shroud Kit

INSTALL THE SHROUD

Screw

Valve

Shroud

Nut

NOTICE: Risk of product damage. Hose should not contact or rub on

the edges of the valve shroud.

 Move the valve shroud around the tube and hose.

 Slide the valve shroud up until it reaches the underside of the valve

body.

 Pinch the tabs on the valve shroud together until they are parallel with

one another.

 Insert the panhead screw through the holes in both tabs of the valve

shroud.

 Thread the nut onto the screw and tighten into place. Do not

overtighten.

 Repeat with the other valve and shroud.