Installation Guide

ManualsBrandsKallista ManualsShop AllKallista 2.5 GPM Circular Body Spray with Integrated Volume Control

INSTALLATION INSTRUCTIONS

TurnSpray™ Bodyspray

1118174_2_B

1 of 4

Questions? Problems? For additional assistance, please contact Kallista’s Customer

Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.

P22076 P22078

Summary of content (4 pages)

PAGE 1
TurnSpray™ Bodyspray INSTALLATION INSTRUCTIONS P22076 1118174_2_B 1 of 4 P22078 Questions? Problems? For additional assistance, please contact Kallista’s Customer Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
PAGE 2
TurnSpray™ Bodyspray INSTALLATION INSTRUCTIONS Thank You For Choosing Kallista We appreciate your commitment to Kallista quality products. Please take a moment to review this manual before you install your Kallista product. If you encounter any installation or performance problems, please do not hesitate to contact us at the phone number listed at the bottom of the page.
PAGE 3
TurnSpray™ Bodyspray INSTALLATION INSTRUCTIONS 1. Install the Supply Piping Multiple Bodyspray Installation Single Bodyspray Installation Nipple Water Supply Nipple Pressure Balancing Loop Multiple Bodyspray Installations Route the water supply lines. If installing more than one bodyspray off the same supply line, construct a pressure balancing loop. Locate a tee along the loop at each bodyspray installation location. Do not strap the pipes at this time.
PAGE 4
TurnSpray™ Bodyspray INSTALLATION INSTRUCTIONS 3. Install the Bodyspray Nipple Escutcheon Bodyspray Head Wrench (Included) Turn the escutcheon until it is fully retracted into the ball joint. Using the included wrench, turn the bodyspray onto the nipple until it is snug. NOTE: A 1/2” driver can be used with the included wrench to increase leverage. Turn the bodyspray head clockwise to the fully closed position.