Installation Guide

INSTALLATION INSTRUCTIONS
TurnSpray™ Bodyspray
1118174_2_B
2 of 4
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX [phone].
THANK YOU FOR CHOOSING KALLISTA
We appreciate your commitment to Kallista quality products. Please take a moment to review this manual
before you install your Kallista product. If you encounter any installation or performance problems, please do
not hesitate to contact us at the phone number listed at the bottom of the page.
BEFORE YOU BEGIN
SPECIAL NOTE: When installing this body spray, check valves shall be used in the hot and cold supplies to the
mixing valve per the requirements of the Uniform Plumbing Code, International Plumbing Code and your local
codes.
Observe all local plumbing and building codes. 
Shut off the main water supply. 
Inspect the supply piping for damage. Replace as necessary. 
The appearance of your product may differ from what is shown in these instructions, however, the 
installation procedure is the same.
Kallista reserves the right to make revisions in the design of products without notice, as specied in the 
Price Book.
TOOLS AND MATERIALS
Wrench
(Included)
Strap
Wrench
Thread
Sealant