Installation Sheet

INSTALLATION INSTRUCTIONS
Lavatory Faucet
1223783-2-F
4 of 7
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
2. INSTALL THE HANDLES
Seal
Gasket
Washer
All Other Trim
P24800
DO NOT apply silicone
sealant in this groove.
Apply 100% silicone
sealant in this area only.
O-Ring
P24706 Trim
Apply 100% silicone sealant
to the underside of escutcheon.
Install the Handle Assemblies
 Ensure that the seal gasket or O-ring is installed to the underside of each of the handle assemblies.
For P24706: Apply a bead of 100% silicone sealant to the underside of the escutcheon.
For P24800: Apply a bead of 100% silicone sealant around the base of the handle assembly.
 Fit the valve assemblies through the top of the lavatory.
 Partially thread the screws into the rings.
 Install the washers and rings onto the valve assemblies. Thread the rings up the valve assemblies.
 Align the handles.
Optional for P24705: When installing Saint-Louis handles, align so the logo faces away from the spout when in the
OFF position.
 Tighten the screws. Do not overtighten!