Manualshelf

Installation Sheet

ManualsBrandsKallista ManualsBathroom FaucetsPer Se 1.2 GPM Widespread Bathroom Faucet with Tall spout
1234567
INSTALLATION INSTRUCTIONS
Lavatory Faucet
1223783-2-F
6 of 7
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
5. COMPLETE THE CONNECTIONS
Supply Hoses
(Not Provided)
Hot
Cold
Install the lavatory according to the lavatory manufacturer’s instructions.
Connect the supply hoses (not provided) to the supply stops (left is hot; right is cold).
Tighten all connections with an adjustable wrench.
6. COMPLETE THE INSTALLATION
Key
Aerator
Connect the P-trap (not supplied) to the tailpiece.
Ensure that all connections are watertight.
Remove the aerator by turning it counterclockwise. If needed, use the supplied key to remove the aerator.
Open the drain. Turn on the water supply and check all connections for leaks. Repair as needed.
Open both the hot and cold valves.
Run water through the spout for 1 minute to remove any debris.
Turn off the valves.
Reinstall the aerator. Retain the key for future use.