Installation & Assembly

INSTALLATION INSTRUCTIONS

Showerhead

1226928-2-A

1 of 3

Questions? Problems? For additional assistance, please contact KALLISTA’s Customer

Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.

P24760

PAGE 1
Showerhead INSTALLATION INSTRUCTIONS P24760 1226928-2-A 1 of 3 KALLISTA ©2014 Questions? Problems? For additional assistance, please contact KALLISTA’s Customer Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
PAGE 2
Showerhead INSTALLATION INSTRUCTIONS THANK YOU FOR CHOOSING KALLISTA We appreciate your commitment to KALLISTA quality products. Please take a moment to review this manual before you install your KALLISTA product. If you encounter any installation or performance problems, please do not hesitate to contact us at the phone number listed at the bottom of the page. BEFORE YOU BEGIN CAUTION: Risk of scalding. KALLISTA low-flow showerheads are designed for use with compatible KALLISTA valves.
PAGE 3
Showerhead INSTALLATION INSTRUCTIONS INSTALL THE SHOWERHEAD Apply thread sealant.      1226928-2-A 3 of 3 Thread the showerhead on and tighten. Run cold and hot water through the shower arm for several minutes to flush out dirt and debris. Install the showerhead as shown. Secure the showerhead to the shower arm using a clean wrench. Pivot the showerhead to verify smooth operation. Run water through the showerhead to check for leaks between the shower arm and showerhead inlet. Adjust as needed.