Installation Sheet

INSTALLATION INSTRUCTIONS
Kitchen Sink Sidespray
1104265_2_A
2 of 2
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX [phone].
THANK YOU FOR CHOOSING KALLISTA
We appreciate your commitment to Kallista quality products. Please take a moment to review this manual
before you install your Kallista product. If you encounter any installation or performance problems, please do
not hesitate to contact us at the phone number listed at the bottom of the page.
BEFORE YOU BEGIN
Observe all local plumbing and building codes. 
The appearance of the sidespray may differ from the illustrations. The installation instructions still apply. 
Install this product according to the installation guide. 
Note: Plumbing codes require an atmospheric vacuum breaker be installed in-line with sidesprays. Ensure
that the faucet contains an atmospheric vacuum breaker, or consult with local plumbing ofcials.
Kallista reserves the right to make revisions in the design of faucets without notice, as specied in the Price 
Book.
INSTALLATION
Sidespray
Spray Holder
Gasket
Nut
Spacer (for thin
mounting surfaces)
Sidespray Inlet Hose
Sidespray Outlet
(from faucet)
Sink
Remove plug
(if present)
Ensure that the gasket is installed in the underside of the 
spray holder.
Insert the spray holder into the mounting hole. 
From underneath the mounting surface, install the spacer (if 
needed) and nut. Securely hand tighten the nut.
Insert the sidespray with sidespray hose through the spray 
holder.
Verify the sidespray hose outlet and inlet are clean and verify 
an O-ring is in place in the sidespray hose inlet.
Remove the plug from the sidespray outlet (from the faucet). 
Connect the sidespray outlet hose to the sidespray inlet
hose.
Extend and retract the spray hose to check for smooth 
operation.
Reposition the supply hoses if necessary. 