Installation Guide Wall Sconce P31221-00 1020039-2-B
Thank You For Choosing Kallista We appreciate your commitment to KALLISTA quality products. Please take a moment to review this manual before you install your KALLISTA product. If you encounter any installation or performance problems, please do not hesitate to contact us at the phone number listed on the back cover. Tools and Materials Electrical Tape Blade Screwdriver E12 Candelabra Base Bulb (60 W Maximum) Before You Begin WARNING: Risk of personal injury.
Before You Begin (cont.) Kallista reserves the right to make revisions in the design of products without notice, as specified in the Price Book.
Ø 3-3/16" (81 mm) 8" (203 mm) Ø 4-1/2" (114 mm) P31221-00 4-5/8" (117 mm) Roughing-In 1020039-2-B 4 Kallista
Outlet Box Mounting Plate Outlet Box Screws Wires 1. Install the Wall Plate WARNING: Risk of personal injury. To avoid possible electrical shock, the electricity must be turned off at the circuit breaker or fuse box before attempting any installation procedure. Carefully pull the wiring out from the outlet box and allow the wires to hang down. Place the flanged side of the mounting plate toward you, as shown. Align the mounting holes on the mounting plate with the holes on the outlet box.
Fixture Outlet Plastic Wire Nut Green or Bare Copper Ground Bare Neutral White White Black Black Hot 2. Connect the Electrical Wires WARNING: Risk of personal injury. To avoid possible electrical shock, the outlet box must be properly grounded. Attach the bare copper ground wire from the fixture to the ground wire (green or bare wire) of the outlet box. Fasten the ground wires together with a plastic wire nut and wrap with electrical tape.
Glass Shade Wall Plate Sconce Setscrew 3. Install the Wall Sconce Secure the sconce to the wall plate with the setscrews. The sconce must be flush against the finished wall. Insert an E12 candelabra base bulb (60 W maximum) into the fixture. Position the glass shade on the threaded socket of the sconce. Turn on the main electrical supply from the main fuse or circuit breaker. Check for proper operation.
USA/Canada: 1-888-4-KALLISTA Fax: 1-888-272-3094 kallista.