Installation Guide

INSTALLATION INSTRUCTIONS

Bathroom Accessories

1146044-2-C

4 of 6

Questions? Problems? For additional assistance, please contact KALLISTA’s Customer

Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.

1. INSTALL THE WALL PLATES

Drywall Between Studs

Wall Plate

Multiple-Post Installation Single-Post Installation

Ceramic Tile Drywall Into Studs

Ø 1/8"

(3 mm)

Ø 1/4"

(6 mm)

Wall Plate

Ø 5/16"

(8 mm)

 Measure and mark the top hole locations for the wall plates.

 Align the wall plates with the marked top hole locations and mark the bottom hole for each wall plate.

 Make sure the wall plates will be level when mounted.

NOTE: Anchors have been supplied for both drywall and tile applications. If anchors are needed, select the

correct anchors for the wall material.

 Drywall between studs: Drill holes using a 5/16” drill bit. Use the provided pin to install the drywall

anchors.

 Ceramic tile: Drill holes using a 1/4” drill bit. Install the tile anchors.

 Drywall into studs: Drill pilot holes using a 1/8” drill bit.