Installation Guide

INSTALLATION INSTRUCTIONS

Bathroom Accessories

1146044-2-C

5 of 6

Questions? Problems? For additional assistance, please contact KALLISTA’s Customer

Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.

2. INSTALL THE TOWEL BAR AND HOOK

Setscrew

Towel Bar

Towel

Bar Arm

Setscrew

O-Ring

Setscrew

Hook

 Attach the wall plates to the ﬁ nished wall with the wood screws.

Secure the Hook

 Place the hook over the wall plate.

 Secure the hook to the wall plate with the setscrew.

Secure the Towel Bar

NOTE: The towel bar can be cut the desired length. Be sure to adjust the distance between the wall plates

accordingly.

 Make sure the O-rings are installed in the towel bar arms.

 Wet the O-rings with water.

 Slide the towel bar arms into the towel bar.

 Place the ends of the towel bar arms over the wall plates.

 Secure the towel bar arms to the wall plates with the setscrews.

NOTE: The wall plates can be adjusted slightly to ﬁ ne-tune their alignment with the towel bar arms.