Installation Sheet

INSTALLATION INSTRUCTIONS
Freestanding Bath
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or kallista.com.
1297399-2-C
4 of 5
2. INSTALL THE BATH
Drain
Pipe
Bath
Drain
Align.
Construction
Adhesive
CAUTION: Risk of personal injury. This bath is extremely heavy. Obtain sufcient help and use lifting
straps to carefully lift or move the bath.
CAUTION: Risk of property damage. Make sure the factory-installed drain connections have not become
loose during shipping. Tighten as needed to prevent leakage.
 With help, use lifting straps to carefully lift the bath off the oor.
 Apply construction adhesive inside the perimeter of the footprint on the oor, within about a 2" (51 mm)
area inside the traced line.
 Carefully set the bath on the oor, aligned with the traced footprint. Adjust the bath position as needed to
ensure that the drain pipe is in the center of the bath drain hole.
 Wipe away any excess adhesive.