Operation Manual

Generated by Unregistered Batch DOC TO PDF Converter 2011.3.804.1511, please register!

INSTALLATION

2. Drill hole on wall

 Drill 70mm hole on the left side or right side.

3. Install the wall-through pipe

 Insert the wall-through pipe into the hole.

 Have 15mm of pipe outside the wall.

 Use putty to seal the hole.

4. Direction of tubing

 Tubing can be connected in direction of 1,2,3,4,5.

5. Tubing connection

Pull out the pipe of indoor unit and drainage hoses.

 Remove fixture of pipes and pull pipes and drainage

hoses out of the indoor unit.

 Straighten backward the pipes and drainage hoses.

Connect pipes

 Put the taper nut in the center of the pipe, then fasten

it.

 Fasten the nut tight with a spanner.

Pipe size

Torque

6

1.8kg. m

12

5.5kg.m

6. Fix indoor unit

 Put the indoor unit on the upper part of the AC-fixing

board, make the two hooks of the indoor unit well

match with the upper part of the AC-fixing board.

 Move the indoor unit to ensure hooks properly match

with AC-fixing board.

Installation of outdoor unit

1. The wall bearing the outdoor unit has to be solid enough, if

there is platform for outdoor unit, just put the unit on platform.

 Drill a hole for expansion bolt on wall according to the

fixing hole of installation frame of AC.

 Fix 4 expansion bolts.

 Fix the installation frame and fasten the bolts.

 Put the outdoor unit on the frame, then fasten the

outdoor unit on the frame properly.

2. Connection of the pipe

 Put the taper nut in the center of the pipe, then fasten

it by hand.

 Fasten the nut tight with a spanner.

3. Connection of the outdoor unit.