Operation Manual

Generated by Unregistered Batch DOC TO PDF Converter 2011.3.804.1511, please register!
5
OPERATION
Auto control
Under auto operation, the microcomputer will produce the ideal environment according to the actual
room temperature.
Operation:
1. Press the "ON/OFF" button to switch on the air conditioner.
2. Press the "mode" button to choose the auto operation mode.
3. Press the "temp " buttons to set the temperature.
4. Press the "fan speed" button to set the fan speed.
5. Press the "swing" button to choose the airflow direction.
Cooling
Under cooling operation, the indoor unit delivers cool air, and the outdoor unit delivers warm air. It is
usually used when the room temperature is higher than 27°C.
Operation:
1. Press the "ON/OFF" button to switch on the air conditioner.
2. Press the "mode" button to choose the cooling operation mode.
3. Press the "temp" buttons to set the temperature
4. Press the "fan speed" button to set the fan speed.
5. Press the "swing" button to choose the airflow direction.
Dehumidification
This operation mode is usually used when the room is damp.
When the ambient temperature is higher than the set temperature, the air conditioner will be in cooling
operation.
When the ambient temperature is lower than the set temperature, the air conditioner will operate by
shifting between "on" and "off" condition.
When the air conditioner is in dehumidification, the fan works at low speed.
Operation:
1. Press the "ON/OFF" button to switch on the air conditioner.
2. Press the "mode" button to choose the dehumidification mode.
3. Press the "temp" buttons to set the temperature
4. Press the "swing" button to choose the airflow direction.
Heating
Operation:
1. Press the "ON/OFF" button to switch on the air conditioner.
2. Press the "mode" button to choose the heating operation mode.
3. Press the "temp" buttons to set the temperature
4. Press the "fan speed" button to set the fan speed.
5. Press the "swing" button to choose the airflow direction.
Ventilation
When the air conditioner will not be used for a long time, make it work in ventilation mode for at least
two hours to dry it.
Operation:
1. Press the "ON/OFF" button to switch on the air conditioner.
2. Press the "mode" button to choose the ventilation mode.
3. Press the "fan speed" button to set the fan speed.
4. Press the "swing" button to choose the airflow direction.