Generated by Unregistered Batch DOC TO PDF Converter 2011.3.804.
Generated by Unregistered Batch DOC TO PDF Converter 2011.3.804.
Generated by Unregistered Batch DOC TO PDF Converter 2011.3.804.1511, please register! SPECIFICATION Model no. Cooling capacity Power/Ampere consumption for cooling* Air volume (max. speed) Dehumidification capacity Recommended room size Power supply Compressor Refrigerant Refrigerant load* Fan speed Timer Thermostat Net Weight Dimension AC-9000M 9000 BTU/hr 2268 Kcal/hr 2637 watts 830W/ 3.9A 470m3/h 26.
Generated by Unregistered Batch DOC TO PDF Converter 2011.3.804.1511, please register! BEFORE USE GENERAL SAFETY Only use the appliance in upright position on a flat level surface and at least 50cm from any object (Fig 1 & 4). Do not place objects on the unit or restrict the air inlet / outlet . Closely supervise any children and pets when the unit is in use. ELECTRICAL SAFETY This appliance is for indoor use only. Switch off and unplug the appliance when it is not in use.
Generated by Unregistered Batch DOC TO PDF Converter 2011.3.804.1511, please register! PARTS Front Back 1. 2. 3. 4. Control Panel (for a picture of the panel, see page 8) Air outlet Carrying handle Wheel 5. 6. 7. 8. 9. Accessories 10. 11. 12. 13. 14. 15. 16. 17. Inward adaptor - for insertion over the hose and into the exhaust air outlet in the back of the air conditioner. Outward adaptor - for insertion over the hose and into the foam strip (or into the hole in the wall/window).
Generated by Unregistered Batch DOC TO PDF Converter 2011.3.804.1511, please register! INSTALLATION Installation of the exhaust pipe The unit is a portable air conditioner that may be moved from room to room. 1. Using the foam strips Caution: This technique can only be used for sash windows. Offer foam strips to the window gap and cut them to size if necessary. Pass the exhaust hose through the foam strip, insert the strip into window gaps and slide the window across so that foam is held securely.
Generated by Unregistered Batch DOC TO PDF Converter 2011.3.804.
Generated by Unregistered Batch DOC TO PDF Converter 2011.3.804.1511, please register! Mounting of the exhaust pipe Use only the hose provided and clip the exhaust hose and unit adaptor to the back of the air conditioner. Avoid kinks and bends in the exhaust hose as this will cause FIG. 8 expelled moist air to build up causing the unit to overheat and shut down. Fig 8 & 9 show the correct position of the hose.
Generated by Unregistered Batch DOC TO PDF Converter 2011.3.804.1511, please register! Installation of the carbon filter First unplug the appliance. 1. Remove the filter frame from the unit. (Fig. 12.1) 2. Separate the filter grid from the filter frame. (Fig. 12.2) 3. Remove the active carbon filter from its plastic bag and cut it to the correct length if necessary. (Fig. 12.3) 4. Insert the active carbon filter into the filter frame. (Fig. 12.4) 5.
Generated by Unregistered Batch DOC TO PDF Converter 2011.3.804.
Generated by Unregistered Batch DOC TO PDF Converter 2011.3.804.1511, please register! OPERATION 1. 2. 3. 4. 5. 6. 7. Power indicator Fan operating indicator Cooling operating indicator 'Full water' indicator Thermostat Speed switch with options for - LOW FAN, HIGH FAN, LOW COOL, HIGH COOL Timer (1-8 hours) as well as ON/OFF switch Turning ON/OFF Set timer to ON for continuous operation (the unit will operate as long as it is not turned off). The power indicator comes on.
Generated by Unregistered Batch DOC TO PDF Converter 2011.3.804.1511, please register! Regulating the air flow direction Turn the roller on the air vent to control the air flow direction of the vertical louvers. (left/right) Move the air vent directly to adjust the air flow direction of the horizontal louvers. (up/down) CAUTION ! 1. To prolong the compressor's life, after switch-off of the unit, please wait for 3 minutes (at least) before re-switch. 2.
Generated by Unregistered Batch DOC TO PDF Converter 2011.3.804.1511, please register! If you wish to operate the unit without the need to empty the water tank, please: Remove the drain knob and rubber plug and retain for future use. Connect the drain tube supplied to the water outlet as shown and locate the other end into a drain. The drain tube may be extended by adding an extension tube and using a suitable connector. Please note 1. The drain must be at or below the outlet level. 2.
Generated by Unregistered Batch DOC TO PDF Converter 2011.3.804.1511, please register! End of season storage Drain the water out of the unit and then operate the unit on ventilation only mode for a few hours to thoroughly dry the inside. Clean or change the filter. Unplug the appliance and store the power cord as shown. Replace the appliance in its original carton or cover it for storage.
