Operation Manual

Do not install, service or move the air conditioner on your own. Improper process can cause fire, electric shock, the falling
unit can injure people or cause water leakage. Contact our qualified service center.
The appliance shall be installed in accordance with
national wiring regulations. The appliance must not be
installed in the laundry. The appliance must be installed
2.3m above the floor. The appliance must be positioned so
that the plug is accessible. Check that the voltage on the
rating plate on back of unit corresponds to the voltage of
your earthed supply.
Clean the air conditioner with a soft and dry cloth. Do not
use chemical solvent, insecticide, inflammable -spraying
material or which could damage the air conditioner.
Do not install the air conditioner in where leak flammable
gas. If there is electrical leakage accidentally from air
conditioner, it is easy to cause fire or explosion, as is very
dangerous.
Do not put burning appliances at the place where can
be blown directly by the air, insufficient gas burning may
occur.
Stop operation and unplug the power cord immediately if
abnormality is found (burned smell etc).
Do not use for special purposes. Do not use to store
precision equipment, food, painting etc, which are required
humidity and temperature, for their quality may be affected.
Do not operate the air conditioner at COOL/DRY mode for
a long time under high humidity (above 80%), if
door/window is open or under high humidity condition,
condensation may drop from the unit.
Close doors and windows (better using contains) while
operating the air conditioner for a long time, if room air is
quite turbid, you should open a door and window for a
moment to get some outdoor fresh air.
WARNING