Operation Manual

Copies of the I/B. Please reproduce them without any changes
except under special instruction from Team International BELGIUM.
The pages must be reproduced and folded in order to obtain a
booklet A5 (+/- 148.5 mm width x 210 mm height). When folding,
make sure you keep the good numbering when you turn the pages
of the I/B. Don’t change the page numbering. Keep the language
integrity.
25 TKG MG 37 DGC - 081128
Assembly page 25/56
Fax [phone]

AC-5
Beverage
To heat a cup with 250ml or 500ml liquid. Use a cup with a
big opening and do not seal the opening.
AC-6
Potato
To cook jacket potatoes. Select medium-sized potatoes of
approximately 200g for a total weight of about 0.45kg or
0.65kg. Wash and dry the potatoes, place them on a large
dish and cover the dish with an appropriate cover. Turn the
potatoes halfway during the cooking process.
AC-7
Pizza
To heat up a slice of pizza of about 0.15kg.
AC-8
Fish
To steam a fish of about 0.45kg. When the fish has been
washed and the scales have been removed, slit the skin of
the fish. Put the fish on a shallow dish (22-27cm diameter)
and sprinkle it lightly with the ingredient of your choice.
Let it stand for 2 minutes after cooking.
1. Press the “Auto Cook” key to select the desired auto code corresponding to the food you
want to cook.
2. Turn the rotary knob to set the desired quantity (see table).
3. Press "Instant.Start" to start cooking.
Note: you can adjust (increase or decrease) the cooking time if necessary.
PRESET FUNCTION
It is possible to delay the start-up time of the appliance by pre-setting it.
To do so:
1. Set the clock (see section “Setting the clock”).
2. Set a cooking programme (cooking mode + cooking time) without pressing "Instant.Start"
at the end of the setting. Note: The defrost function and the AUTO-menu cannot be
preset.
3. Press "Preset.Clock" and hold it for 3 seconds. The current time will be displayed.
4. Turn the rotary button to set the hours (0-23) of the time at which the cooking should start.
5. Press "Preset.Clock" again; the last figures indicating the minutes will start flashing.
6. Turn the rotary knob to set the minutes (0-59).
7. Press "Preset.Clock" to confirm the setting.
8. As soon as the preset time is reached, the appliance will be switched on according to the
chosen cooking setting.
Note: If the clock has not been set beforehand, the preset function will not work.
If you press "Preset.Clock" in the preset state, the preset time will be displayed.
MULTI-STAGE COOKING
Four stages can be set at most. If one of the stages involves defrosting, this stage has to come
first.
1. Set a cooking programme without pressing "Instant.Start" at the end of the setting.
2. Set a second cooking programme (and if desired also a third and a fourth) and press
"Instant.Start" only at the end of the last setting.
3. The appliance will be switched on according to the first cooking setting. The time counts
down for the first setting.
4. When the first stage has finished, the oven starts according to the second cooking setting.
5. At the end of the cooking time of the last stage, 3 beeps will sound.