Instruction manual

Satellite speaker panel
When inserting speakeron plugs remember to turn the plug clockwise to lock the plug into position. To remove the spearkeron plug
please slide back the metal locking catch and twist the speakeron to the anti-clockwise position before removing the plug.
Speakeron plug wiring
Connect the positive + to the +1 connector
Connect the negative- to the -1 connector
+2/-2 are not used
Specifications
Satellite speakers
Power handling
75W RMS / 150W peak
Frequency response
90 Hz – 20 kHz
Sensitivity (1m/1w)
90 dB
Max. SPL (1m)
110 dB
Nominal Impedance
8 Ohms
Input
2 x speakeron connectors
LF driver
1 x 6.5” with 1.5” voice coil
HF driver
1 x 1” voice silk cloth dome
Crossover frequency
3 kHz, 12 dB/octave
HF protection
Dynamic protective circuit
Pole mount
35mm
Dimensions (WxHxD)
225 x 346 x 215mm
Net weight
6.4Kgs
Subwoofer
Line
XLR male & female, ¼” phone jack
Input
Electronically balanced & floating
Input Impedance
22k Ohms
Sensitivity
0 dB/v
Output
Speakeron connector
Subwoofer amp
1 x 250W RMS
Satellites amp
2 x 75W RMS
Subwoofer
1 x 10” with 2” voice coil
Nominal Impedance
4 Ohms
Frequency response
45Hz – 150Hz
Sensitivity (1m/1w)
90dB
Max. SPL (1m)
123 dB
Dimensions (WxHxD)
340 x 429 x 460mm
Net weight
25.6Kgs