Instructions / Assembly

29 30
Caution: Air Lift Hinge under high tension.
BIG JOE
1 Open the dome of your Kamado Joe Big Joe grill.
2 With the dome open, place the 10mm wrench on the flats on
the screw (see Inset 1). If your unit does not have the flats, place
a 7mm socket wrench on the bottom end of the screw instead of
using the 10mm wrench (see Inset 2).
3 Place the 19mm wrench on the nut on top of the spring
retainer (see Inset 1).
4 To make the dome easier to raise, hold the 10mm (or 7mm)
wrench stationary and rotate the 19mm wrench clockwise
as shown. Remove the wrenches and check the dome action
for every full rotation of the nut. If you want the dome to
feel heavier, rotate the nut counter-clockwise. Remove the
wrenches and check the dome action for every full rotation of
the nut. Do not adjust the nut so that it contacts the connector
(see Inset 1).
Big Joe Air Lift Hinge Adjustments
Inset 1
Connector
Flats on screw
Adjustment nut on
spring retainer
Inset 2
Hex end for 7mm
socket wrench
TOOLS REQUIRED: 10MM OPEN END WRENCH OR 7MM (OR 9/32 INCH) SOCKET
WRENCH, DEPENDING ON THE MODEL. 19MM OPEN END WRENCH (OR 3/4 INCH
OPEN END WRENCH)
The Air Lift Hinge on your Kamado Joe Big Joe is already
pre-adjusted for ideal balance and stability. Follow these
instructions for any additional adjustment to suit your
personal preferences.
ADJUSTMENTS
ADJUSTMENTS