Instruction Manual

ManualsBrandsKaman ManualsToolsKD-2440

PART NO: 860135-001 3450 North Nevada Avenue

Rev. B Colorado Springs, CO 80907

www.kamaninstrumentation.com or 719-635-6979

Noncontact Displacement Measuring

System User’s Manual

This apparatus, when installed and operated per the manufacturer’s recommendations, conforms

with the protection requirements of EC Council Directive 89/336/EEC on the approximation of the

laws of the member states relating to Electromagnetic Compatibility. Please refer to the KD-2440

Declaration of Conformity or contact Kaman Precision Products for details.

KD 2440

PIN SIGNAL

2 SWITCH

3 SWITCH

4,7 V IN

5 COMM

9 V OUT

1.902

(48.3)

2.357

(59.9)

.610

(15.5)

Instrumentation

KAMAN

1.23 (31.24)

.984

(24.99)

Home

Summary of content (7 pages)

PAGE 1
Home Noncontact Displacement Measuring System User’s Manual 1.23 (31.24) .984 (24.99) Copyright © 1998 PART NO: 860135-001 Rev. B Kaman InstrumentationOperations 3450 North Nevada Avenue Colorado Springs, CO 80907 www.kamaninstrumentation.com or 719-635-6979 PIN SIGNAL 2 SWITCH 3 SWITCH 4,7 V IN 5 COMM 9 V OUT KD 2440 KAMAN 2.357 (59.9) 1.902 (48.
PAGE 2
Home • • • • KD-2440 Unit The KD-2440 system consists of three subassemblies: the sensor with integrated cable, the signal conditioning electronics module, and the power and output cable. The KD-2440 electronics uses a standard DB-9 connector to bring +12 Vdc to +24 Vdc into the electronics and provide outputs for the analog voltage and switch functions.
PAGE 3
Home 9C Sensor Response Data: 12 Vdc High Gain 8 6 24 Vdc Low Gain 12 Vdc Low Gain 4 2 0 0 50 100 150 200 Displacement, Mils 6 12 Vdc Low Gain 4 2 0 0 50 100 150 200 Displacement, Mils 250 DC Output Voltage 4130 Steel Output for 12 & 24 Volt Inputs 14 24 Vdc High Gain 12 10 12 Vdc High Gain 8 6 4 24 Vdc Low Gain 12 Vdc Low Gain 2 0 0 50 100 150 200 Displacement, Mils 250 6 12V in Aluminum 12V in 303 Stainless 2 12V in 4130 Steel 0 50 100 150 200 Displacement, Mils 250 10 DC Output
PAGE 4
Home KD-2440 9C Sensor Specifications: Specifications RG179 coax cable .320 Dia (8.13) 3/8-24 THD ELECTRICAL 1.030 (26.16) SMA Male Connector INPUT 1.250 (31.75) Voltage: Regulated 12 VDC to 24 VDC Current: Fuse limit input current from power source to 11 mA, .28W maximum at full load ANALOG OUTPUT Current (Full load): 4.
PAGE 5
Home KD-2440 9C Sensor Specifications: Specifications RG179 coax cable .320 Dia (8.13) 3/8-24 THD ELECTRICAL 1.030 (26.16) SMA Male Connector INPUT 1.250 (31.75) Voltage: Regulated 12 VDC to 24 VDC Current: Fuse limit input current from power source to 11 mA, .28W maximum at full load ANALOG OUTPUT Current (Full load): 4.
PAGE 6
Home 9C Sensor Response Data: 12 Vdc High Gain 8 6 24 Vdc Low Gain 12 Vdc Low Gain 4 2 0 0 50 100 150 200 Displacement, Mils 6 12 Vdc Low Gain 4 2 0 0 50 100 150 200 Displacement, Mils 250 DC Output Voltage 4130 Steel Output for 12 & 24 Volt Inputs 14 24 Vdc High Gain 12 10 12 Vdc High Gain 8 6 4 24 Vdc Low Gain 12 Vdc Low Gain 2 0 0 50 100 150 200 Displacement, Mils 250 6 12V in Aluminum 12V in 303 Stainless 2 12V in 4130 Steel 0 50 100 150 200 Displacement, Mils 250 10 DC Output
PAGE 7
Home • • • • KD-2440 Unit The KD-2440 system consists of three subassemblies: the sensor with integrated cable, the signal conditioning electronics module, and the power and output cable. The KD-2440 electronics uses a standard DB-9 connector to bring +12 Vdc to +24 Vdc into the electronics and provide outputs for the analog voltage and switch functions.