SpeedSteam Iron Instruction Booklet KI450/KI480 80_IB_D12.
Important Please retain your instruction book for future use. In the event that you need some assistance with your Kambrook appliance, please contact our Customer Service Department on 1300 139 798 (Australia) or 0800 273845 (New Zealand). Alternatively, visit us on our website at www.kambrook.com.au or www.kambrook.co.nz As part of our commitment to the environment, and as members of the Australian Packaging Covenant, we have reduced the size of our instruction manuals on this product.
80_IB_D12.
Kambrook Recommends Safety First IMPORTANT: Please retain your instruction book for future use. At Kambrook, we believe that safe performance is the first priority in any consumer product, so that you, our valued customer can confidently use and trust our products. We ask that any electrical appliance that you use be operated in a sensible fashion with due care and attention placed on the following important operating instructions.
• Do not use outdoors or in bathrooms. • Do not store the iron with water in the water tank. Always empty the tank after use. Ensure the iron is cool before storing or wrapping the cord around the storage heel facility. • Always switch off at the power outlet, then unplug the appliance from the outlet: --Before filling with water or emptying it. --Before leaving it unattended. --Before cleaning and maintenance, unless otherwise specified in this booklet. --Immediately after use.
Your Kambrook SpeedSteam Iron 1. Shot of steam button: For an extra burst of steam on thick fabric or tough creases 2. Steam control: Allows you to select how much or how little steam you require 3. Water tank inlet: Large inlet for easy filling of water tank 4. Fine mist spray nozzle 5. Fine mist spray: To dampen fabric especially for dry ironing at low temperatures when steam isn’t available (also assists in removing stubborn creases) 6.
Operating Instructions Before First Use Remove any promotional material or packaging from the iron. Remove any sticker or protective cover from the soleplate. When operating the iron for the first time, iron on an old piece of fabric to ensure that the soleplate and water tank are completely clean. When the iron is used for the first time, some vapour may emit. After a short while however, this will cease. The vapour is due to the initial heating of the materials used in the iron.
Operating Instructions continued Stand the iron on its heel and turn the Temperature Control to MIN. Plug the power cord into a 230V or 240V power outlet and switch on. The Power Indicator light will illuminate while the iron is plugged into an outlet and switched on. NOTE: for KI480 only, the Power Indicator light will remain on even if Auto Off has been activated.
How To Use Shot Of Steam Dry Ironing The shot of steam provides an extra burst of steam which is ideal for the removal of stubborn creases and wrinkles during STEAM or DRY ironing. Turn the steam selector to the MIN position. Turn the Temperature Control to the hottest setting. Ensure the Steam Control corresponds to the setting on the Temperature Control. Lift the iron slightly above the surface of the fabric, press the Shot of Steam button down firmly and release it during ironing.
Operating Instructions continued Anti-Drip System The Kambrook SpeedSteam Iron is equipped with an Anti-Drip System. The iron will automatically close the steam valve when the soleplate temperature is too low to produce steam. When this happens you will hear a click sound. It is safe and will not harm the performance of the iron. This is the reason the Fine Mist Spray should be used when ironing delicate fabrics at low temperatures.
Care and Cleaning To ensure your iron maintains optimum performance it is recommended that it be cleaned using the Self-Clean function to remove scale or impurities. • Set the steam selector to the MIN position. • Fill the water tank up to the maximum level (MAX) with the water cup supplied. • Set the Temperature Control to MAX (linen) setting. • Place the iron in the upright position, insert the plug into the power outlet and switch the iron on. The Power Indicator light will illuminate.
Kambrook - Australia Building 2, Port Air Industrial Estate 1A Hale Street Botany NSW 2019 Australia Customer Service Line 1300 139 798 Customer Service Fax 1800 621 337 www.kambrook.com.au Kambrook - New Zealand Private Bag 94411 Botany, Manukau Auckland 2163 New Zealand Customer Service Line/Spare Parts 0800 273 845 Customer Service Fax 0800 288 513 www.kambrook.co.nz Due to continual improvement in design or otherwise, the product you purchase may differ slightly from the illustration in this book.