User's Manual

9
Check all filters and replace them
regularly. It is recommended to clean
the filters after every use. For normal
household vacuuming the filters
should be replaced at least twice a
year.
If you encounter reduced vacuum
cleaner performance, check:
• Dust capacity in dust container
• All filters, including dust, motor and
exhaust. Any clogging in the filters
will reduce the efficiency of your
vacuum cleaner
To clean the outside of the unit, wipe
the exterior with a soft, damp cloth.
Never use an abrasive cleaner.
Emptying the Dust Container
Fig. 7
Always switch the vacuum off, then
switch off at the power outlet and
unplug prior to replacing filters or
emptying the dust container.
For optimum use, the dust container
should be emptied after every
use. When the dust container
reaches the capacity mark ‘MAX’,
it is essential to thoroughly clean
both the dust container and filters.
Fig. 8
To remove the dust container, ensure
the vacuum is down on its wheels;
remove the dust container by pressing
down on the button on top of the dust
container. Once released carefully lift
the container upwards.
Fig. 9
NOTE: Dependant upon
the amount and type of dirt
collected in the dust container, it
may be necessary to agitate the
dirt inside the dust container for
easier dispensing.
IMPORTANT: Do not use
the unit without a dust
container in place.
Care and Maintenance
KBV250-220-280_IB_B11.indd 9 23/08/11 10:12 AM