User Manual

4
Kambrook Recommends Safety First
IMPORTANT: Please retain your
instruction book for future use.
At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customer can confidently
use and trust our products. We ask that any electrical appliance that
you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.
Important Safeguards For Your Kambrook
Dream Collection Fitted Heated Blanket
Carefully read all instructions before
operating the Kambrook heated blanket and
save for future reference.
Remove any packaging material and
promotional stickers before using the heated
blanket for the first time.
Use the heated blanket only with the
detachable controller CTL152 supplied. Refer
to the markings on the heating unit for the
model number of the controller.
Connect only to 230V or 240V power outlet.
Use this blanket as an under blanket only.
Not recommended for futons or similar
folding bedding systems.
This blanket is not recommended to be
used on an adjustable bed. If used on an
adjustable bed, check that the blanket or
cord cannot become caught, creased,
kinked or damaged in any way.
Make sure that the heating area (wire
element) on any side of the bed does not
hang over the edge of the mattress and that
the following instructions are read carefully
before using the blanket.
Do not attempt to expose the internal wires.
Do not use this blanket with an infant, an
infirm person or anyone insensitive to heat.
Use only for human use, not for pets.
Overly extended application at a high
setting can result in skin irritation or burns.
Children under the age of three are not to
use this heating blanket due to their inability
to react to overheating.
Avoid sharp objects. Do not insert pins or any
sharp objects into the heated blanket as they
may damage the electrical wiring.
Do not use the heated blanket when folded,
rucked or rolled.
Do not tuck in blanket itself - only fitted skirt
should be tucked in under mattress.
Do not use when creased or damaged in
any way.
Keep control unit away from an open
window.
Be sure that this blanket is used only on an
alternating current supply circuit of correct
voltage.
The flexible power supply cord and controller
must, as far as practicable, be kept outside
the bed.
Be sure that the heated blanket is installed
so that at all times the flexible supply plug is
adjacent and accessible to the main power
outlet.
Do not use the heated blanket if it is wet.
Switch off at the power outlet and remove
plug when this blanket is not in actual use.
This blanket must be kept in the fully spread
condition at all times during use to avoid
overheating. It is imperative that the blanket
be frequently inspected to ensure that this
condition is being maintained.
Regularly inspect the heated blanket, power
supply cord, plug and controller for any
wear, damage or misuse. If signs of these
are detected, immediately cease use of
the appliance and return the entire unit to
your nearest Kambrook Service Centre for
examination, replacement or repair.