User Manual

8
Fixing The Removable Cover
(For KEB535 Model only)
Ensure the heated blanket is correctly
fitted to the mattress before fitting the
removable cover (if applicable).
When fixing the removable cover to
the heated blanket, ensure the fleecy
side of the cover is facing upwards.
Secure the removable cover to
the heated blanket using the studs
provided. Ensure all studs are fastened
to prevent the cover from moving.
No other cover other than that
supplied with the blanket should be
used with the heated blanket.
To Connect The Controller
Ensure the heated blanket controller
is in the ‘OFF’ position and not
connected to the power outlet.
To connect your controller, insert the
controller plug into the controller
socket (See Fig. 3).
Ensure that the plug is securely
fastened in the socket so that the
locking clips are fully inserted.
NOTE: The controller plug is
designed to only fit the socket
correctly one way - if the plug
does not push in fully, turn the
plug around.
Fig. 3
Ensure that the plug is securely
fastened in the socket so that the
locking clips are fully inserted and no
gap between the plug and socket
(See Fig. 4)
Fig. 4
To Detach The Controller
Ensure the heated blanket
controller is in the ‘OFF’ position and
disconnected from the power outlet.
Push inwards on the locking clips on
the controller plug to release and
withdraw the plug from the controller
socket (See Fig. 5).
Fig. 5
Using Your Kambrook Heated Blanket Continued...