User Manual

2.3. Wi-Fi Connection Setup through Wi-Fi Mode

Before connecting to your camera, please confirm your home Wi-Fi network is 2.4G. Meanwhile, please

choose 2.4G WiFi to connect your phone. Additionally, please put this camera more close to your router,

it will help you to connect your home Wi-Fi successfully.

1. After successfully register and sign in, you should be brought to the camera list screen. You can see

it’s initially empty because you have not added any camera for it (Figure 1);

2.Select “add device” by clicking the plus icon at the top of left and select the device mode (Figure 2)，

which will direct you to the QR Code Scan page;

3. Scan the QR code at the camera (Figure 3); a device ID should be automatically filled in the “device

ID” input box (Figure 4) if it scans successfully, and then click “Add”.

4. Select “Two-dimensional code connected”mode

5. Enter the WIFI password ( Attention: Support 2.4G WIFI, not support 5G WIFI. The password is not

supposed to include special symbol, should completed in letters and numbers )

6. When the camera start up, there will be drips voice ( means camera is connecting the network ),

if no drips voice please press “reset” button and hold on till the camera voice “reset successfully”,

then wait the camera start up.

7. Put the two-dimensional code on your phone at camera lens, wait the camera connect network.

8. Finish adding camera