User's Manual

5.Installationrecommendations
Ifyouarereplacinganexistingdoorbell,pleaseremoveandremove
thedoorbellanddisconnectthewireswiththeswitchoff.
1)Removetheoriginaldoorbell(optional)
7
8
Ifyouconnectthedoorbellwithanelectronicbell(Ifyourexisting
doorbellhasaspeaker,it'sadigitalchime.),
Youneedtoinstalladiode
Ifyouareusinga
mechanicalindoor
doorbell,pleasedo
notinstalladiode,
itwilldamagethe
existingdoorbell.
Pleasenotethat
theanodeand
cathodeofthe
diodeneedtobe
consistentwiththe
anodeandcathode
ofthewire
2)Forelectronicdoorbell:installdiode(optional)
Diode
KamiDoorbellCamera
PowerConnector
Ifyouareusingamechanicalchime,pleaseinstallthechime
connector.Toensureastablepowersupply.Ifyoudon'twantchime
tomakeasound,pleaseconnectthewiresasshowninthepicture.
3)Formechanicaldoorbell:
installchimeconnector(optional)
Chime
Connector
Youcanalsoconnecthere
ScrewB
1
1
2
Connectionmethod-1
Connectionmethod-2
2