User's Manual

a.Device se rial number：：
b.Current firmware version:Display the current version of the firmware, if the firmware is updated, there will be a prompt below；
c.Name: Here you can modify the device name and the name of each pump head to identify the purpose of the device and pump head；
d.Serial number:Click to enter the display device serial number；
e.Update:Firmware update, if there is a new firmware release, there will be a prompt；
f.Tube type setting:Check and set the life and use time of the pump tube, the pump tube is generally replaced after 1000 hours；
g.Time setting:Set the real-time clock time of the firmware to ensure the correct execution of the pump titration plan；
h.Connect to the smart controlle r:Set to connect to the smart controller, this function is currently not available；
i.Flow rate calibration: Here the flow rate of each pump head is calibrated. The purpose of flow calibration is to improve the accuracy of added
elements；
j.Restore factory settings:Click to restore firmware parameters to factory settings；
k.Delete device:Unbind App and device。
4.9 time setting
When the time of the device does not match the local time, you need to synchronize the real-time clock time of the device through the App to ensure the
normal execution of the device titration plan；
a.Device time:The current real-time clock time of the device;
b.App time:The current time of the phone;
c.Time synchronization:After clicking, the device time will be synchronized. After time synchronization, the running time of the device will be the
same as the time of the mobile phone； a-1, b-1 are the device real-time clock time and mobile phone time after time synchronization;