User's Manual

7. Click "Start using" on this interface to enter the device list interface. At this time, the red status indicator light is on, which means the dosing pump
has been connected to the cloud and the user has completed the binding with the Micropump。
prompt
a. Configure the dev ice to connect to Wi-Fi only once. After the configuration is successful, as long as the App can connect to the
Inte rnet, you can find the device in the device list after opening the App。。
b. If the device configuration fails to conne ct to Wi-Fi, start over from the first step。。
4.2 Binding Micropump
There are two ways for users to bind Micropump，
The first method is to bind Micropump through the above re-distribution method；
The second method is that Micropump has been connected to the cloud through a wireless router. At this time, the mobile phone can be connected to
the wireless router. The App will display the locally available Micropump. The user can click on Micropump list scanned by the locally available
equipment. To bind the corresponding Micropump, the specific operations are as follows：
1-2. Open the App, click the "+" button in the upper right corner of the device to add a device, enter the add device interface, select Micropump to
be bound from the list of locally available devices, and click to enter；