User's Manual

3.After the binding is successful, a successful binding prompt will pop up, click Start to return to the device list；
4.3 Overview of Micropump control interface
Open the App, click on the Micropump in the device list to enter the Micropump operation interface. The Micropump operation interface contains the
running function and setting function：
a. Plan：： indicates the current working mode, where you can switch the working mode. There are 3 working modes, which are the planning mode，
Planning modeThe first one is to set up a dosing plan. The Micropump will titrate regularly and quantitatively according to the plan set by the
user, which solves the tedious and inaccurate manual operation。 The second is to check the total amount and remaining amount of the
solution bottle to let the user know the status of the solution bottle. When the solution bottle is not enough reagent, there will be a yellow
prompt to tell the user to add the reagent in the solution bottle in time。
Manual modeManually run a quantitative
Continuous modeIt runs continuously at one speed and the speed is adjustable. This function can be used for calcium reaction
c.Settings：： Mainly firmware upgrade, time synchronization, flow calibration and other functions
4.4 Schedule dosing-Schedule Setting Details Page
1.Channel details in auto mode