Installation Manual

14
3.6.4 System
Under System, there are three sections under System, as detailed below:
● Online upgrade
Online upgrade displays the current version number and shows if there is
a newer version. You will see a red dot next to the Setting icon identifying
that there is a new upgrade available. To download and install the latest
software version, click Update.
● Restore to factory settings
If you click Restore, it will restore the camera to the factory defaults, which
can restore to factory settings be helpful in case you have made changes
to the camera and want to cancel these changes.
● Restart device
Clicking Restart reboots the camera. It is the same as unplugging the
camera and plugging it back in again but is accomplished remotely.
Note: When the camera goes office, such as when using the Restart
button, the snapshots are deleted if you do not have storage.
3.6.5 Device Admin/Guest Password
 Admin Password
Each camera can have an Admin password. You can choose to give
a person admin permissions on a single camera, but not all of the
other cameras in your system, when you change the password
through this setting.
 Guest Password
If you wish to grant someone access to your camera, you can
assign them a device guest password, which can be disabled at any
time. Guests can view what the cameras are broadcasting and can
move the cameras, but they will not be able to make any changes in
the settings or use the remote microphone.