Installation Manual

16
3.6.8 Accessory
The cameras can detect motion in the viewing areas and can as a result
of that detection, take a snapshot, record a video, trigger an alert, etc.
The Accessory tab offers two options to configure what the camera
should do if and when motion is detected in the covered area:
● Motion Detection
Select the Motion Detection tab to determine how sensitive the
camera is when it comes to sensing motion. You can change the
sensitivity settings for day and night operation separately to improve
motion detection.
● Add Accessory
The Add Accessory is for external devices connected to the camera.
This setting will only occur if the camera has RF peripheral functions.
3.6.9 SD Card
The SD Card section indicates whether you have an SD card in the
camera and whether it is enabled.
● To use the SD card, place it into the slot on the back of the
camera.
● If the camera does not recognize the SD card, remove the
card and unplug the camera. Put in the SD card and then
plug in the camera. The camera will reboot, and then it
should be recognized.
Note: It is always recommended that you format the card after
installation.