Installation Manual

5
to allow the camera getting ready. The camera is ready once you hear a "tick" sound after
connecting the power for 60 seconds. Then, tap “Next” to enter next step (Figure 6).
6) Please press the RESET button 1 seconds to reset the camera. After hearing the voice prompts
(waiting for receiving wireless configuration information), tap “Next” (Figure 7).
7) Then the Wi-Fi network name will automatically display. Please input your Wi-Fi password and tap
the “Next” (Figure 8);
8) It will direct you the connection interface (Figure 9). In order to make the camera connect your Wi-Fi
successfully, please confirm your phone has connected 2.4G Wi-Fi network that you would like the
camera to connect, and keep your phone closer the Mic of the camera (The max distance is 6ft).
9) After the Wi-Fi connection succeeded , you should be asked to modify your camera password (Figure
10). Please input your new camera password and click “Apply”.
10) Please modify your camera name （you can skip this step);
11) Congratulations! You add this IP camera successfully(Figure 11) .
Figure 6 Figure7 Figure 8